Compact Line Fume Hoods
COMPACT LINE – SAFETY IN EVERY LABORATORY
The Compact Line fume hoods ensure safe and comfortable work in the laboratory. Metal construction and a wide range of finishing elements (worktops, fittings, accessories, etc.) allow the fume hood to fit the needs of any laboratory.
POL-EKO fume hoods are manufactured according to the PN-EN 14175 standard.
Standard Equipment
- monolithic ceramic worktop with marine edge
- 2 x 230V 50-60Hz electrical sockets
- 2 x water taps with valves in the front panel
- ceramic sink 280x80mm
- LED illumination of the working chamber
- air-flow sensor (Schneider FM 550-A-0-E)
- window, opening upwards at 500 mm height (max 810 mm /1850 mm for Walk-in), sliding glass (right/left), system preventing uncontrolled window falling
Available Sizes
- Compact Line DCL 1200 /1500 /1800
- Tabletop DCL 800 / 1200 / 1500
- Walk-in DCL 1200/1500/1800
Working Chamber Finishes
SS variant
worktop - solid ceramics th. 27 - 33 mm, with marine edge, ceramic sink (dims 280 x 80 mm) is mounted under the worktop, internal chamber side walls made of steel, covered with chemically resistant epoxy paint.
CR variant
worktop - solid ceramics th. 27 - 33 mm, with marine edge, ceramic sink (dims 280 x 80 mm) is mounted under the worktop, internal chamber side walls made of 8 mm Buchta I ceramic.
PP variant
worktop - solid ceramics th. 27 - 33 mm, with marine edge, ceramic sink (dims 280 x 80 mm) is mounted under the worktop, internal chamber side walls made of polypropylene.
LM variant
worktop - solid ceramics th. 27 - 33 mm, with marine edge, iceramic sink (dims 280 x 80 mm) is mounted under the worktop, internal chamber side walls made of Max Resistance phenolic resin composite.
Metal Compact Line Fume Hoods
The Compact Line DCL series fume hoods come standard with 2 electrical outlets and 2 water spouts with valves on the front panel. The construction of DCL laboratory fume cupboards is entirely made of galvanized steel without the use of wood-based materials. The worktop surface at a height of 900 mm, depending on the model, is selected according to the requirements of the application. All DCL fume hoods are equipped with a tempered glass window, manually operated with a counterbalance. Window opening upwards with locking mechanism at 500 mm height, additionally sliding window can be right/left. The window has a system to prevent it from falling uncontrollably.
The fume hood uses a double back wall system with extraction slots in the upper and lower parts to ensure proper extraction of vapours lighter or heavier than air without turbulence and dead zones, plus a safety flap in the ceiling to ensure decompression in the event of an uncontrolled increase in pressure in the working chamber.
Laboratory fume hoods DCL are controlled from a panel, which includes a full set for monitoring (Schneider) of air velocity in the fume cupboard window in accordance with PE-EN 14175.
Compact Line DCL 1200
Compact Line DCL 1500
Compact Line DCL 1800
Tabletop Compact Line Fume Hoods
Tabletop fume hoods, also called countertop fume cupboards, are most often chosen by schools and small labs, their construction is made entirely of galvanized steel without the use of wood-based materials. Window made of tempered glass, manually operated with counterbalance, opened upwards with a lock at 500mm (max 810mm), the window has a system preventing its uncontrolled falling. The DCL tabletop fume hood is equipped with energy-saving LED linear lighting, separated by glass from the fume cupboard working chamber. The double back wall system with extraction slots in the upper and lower sections ensures correct extraction of lighter or heavier than air vapours without turbulence and dead zones.
Tabletop DCL 800
Tabletop DCL 1200
Tabletop DCL 1500
Walk-In Compact Line Fume Hoods
For applications where large equipment or materials need to be placed under the laboratory fume hood, DCL walk-in metal fume hoods are also available.
The walk-in fume hood is characterized by a large working space without a tabletop, all other elements such as electrical outlets, fittings, grilles or inspection openings can be installed according to the requirements and specifications of the User.
Walk-InDCL 1200
Walk-In DCL 1500
