Home » Kimessa » Kimessa Alarm Devices

Kimessa Alarm Devices

Kimessa Swiss logo 2023
Contact us for Selection Help?

CANline warning light electronic CWED 68

  • The CWED 68 is available with different domes, e.g. orange for explosive or blue for toxic zones
  • Luminaire is suitable for indoor and outdoor installation
  • Any number of CWED 68 can be integrated into the CANline network like a gas measurement transmitter wherever required (bus-compatible)
  • The individual outputs (horn, lamp and relay) can be programmed in different modes
  • Automatic, manual or manual-immediate resetting
  • Time-delayed automatic reset (1-999 sec.)
  • On and off switch delays individually programmable (1-999 sec.)
  • The CWED 68 can be assigned a limit value of one or more
  • gas measuring transmitter and/or a technical fault
  • LED status display for technical fault (red) and bus operation (green)
  • Housing: plastic IP 65
  • Swiss quality product

LED Warning light LW 46

  • Easier understanding through text/pictogram combination
  • Can be combined with external alarm horn
  • Long service life thanks to LED technology (approx. 1000 operating hours)
  • Text available in different languages
  • Also available as a 2-sided version for ceiling mounting (type LW 260)
  • Robust construction
  • Mounted directly on the two eyebolts on the left and right or with chains on the ceiling
  • Profile made of powder-coated sheet steel, gray RAL 7001
  • Only suitable for indoor installation
  • Optional: Text can be modified at the customer's request
  • Operating temperature: -20...+55 °C
warning-light-in-carpark

CO LED-Warning light LW 1101/1102

  • Increased visibility thanks to 2-color LED combination
  • Easier understanding through text/pictogram combination
  • Can be combined with external alarm horn
  • Long service life thanks to LED technology
  • Text available in different languages
  • Also available as a 2-sided version for ceiling mounting (type LW 1102) Robust design
  • Mounted directly on the wall
  • Profile made of powder-coated sheet steel, gray RAL 7001
  • Only suitable for indoor installation
  • Options: Text and colors can be modified on customer request
  • Operating temperature: -20...+55 °C

Flashing light PS 651

  • Impact resistant ABS plastic housing, colour light grey
  • Lamp cap made of polycarbonate, available in orange (standard), blue, red and green
  • Xenon flash tube with 5 joules
  • Supply voltage: 230 VAC (other voltages on request)
  • Interior installation (option also outdoors)
  • Ambient temperature: -20 °C…+70 °C
  • Life service approx. 2,000 hours of operation
  • SEV tested
  • Dimensions: approx. 10×20 cm

Flashing light with horn PS 682

  • Combination of powerful flashing light and horn
  • Clear visual warning with orange dome
  • Acoustic signal with 95 dB for reliable alerting
  • Flash frequency 1 Hz for high attention
  • Robust polycarbonate housing, protection class IP 66
  • For use in demanding environments (-30 °C to +60 °C)
  • Compact design: H 136 x W 62 mm, weight 113 g
  • Simple installation via screw terminal with wire protection (up to 1.5 mm)
  • Cable entry with membrane grommet (max. cable diameter 13 mm)
  • Operating voltage 24 VDC, current consumption 98 mA
  • CE-approved for safe use

Combined flashing light with horn KDF

  • Electromechanical small horn combined with signal or flashing light
  • Signal light Ø 60 mm with clear visual recognition
  • Sound and light signals can be controlled separately
  • Powerful acoustic signal 88-92 dB
  • Flash frequency 1.4 Hz for high attention
  • Robust ABS housing in gray RAL 7035, protection class IP 43
  • Operating voltage 230 VAC, low current consumption of 25 mA
  • Simple installation via 3×1.5 mm connection cable
  • Tested for use in safety-relevant applications (CE)
  • Suitable for the temperature range from -20 °C to +50 °C

CANLINE warning light electronic CWED 582

  • Any number of CWE 582s can be integrated into the CANline network like a gas measurement transmitter wherever required (bus-compatible)
  • The individual outputs (horn, lamp and relay) can be programmed in different modes
  • Automatic, manual or manual-immediate resetting
  • Time-delayed automatic reset (1-999 sec.)
  • On and off switch delays individually programmable (1-999 sec.)
  • The CWE 582 can be assigned a limit value of one or more
  • gas measuring transmitter and/or a technical fault
  • LED status display for technical fault (red) and bus operation (green)
  • Swiss quality product

Alarm horn PS 581

  • Impact-resistant ABS plastic housing, color light grey
  • Power approx. 92 dB (A), 1m/current consumption 70 mA
  • Supply voltage 24 VDC (other voltages on request)
  • Connection: Appliance terminal ≤ 1.5 mm 2
  • Ambient temperature: -15°C...+50°C
  • Protection class IP 32 according to EN 60529
  • Indoor installation
  • Weight approx. 0.18 kg
  • CE tested

Alarm horn PS 55

  • Impact-resistant ABS plastic housing, color light grey
  • Power approx. 95 dB (A), 1m/current consumption 15 mA
  • Supply voltage 230 VAC (other voltages on request)
  • Connection: Appliance terminal ≤ 1.5 mm 2
  • Ambient temperature: -15°C...+50°C
  • Protection class IP 32 according to EN 60529
  • Indoor installation (outdoor option also available)
  • Weight approx. 0.18 kg
  • CE tested