Italcoppie Sensori
WE SENSE TEMPERATURE
Italcoppie are your problem solvers for temperature measurement tasks. Italcoppie is renowned for delivering technically and economically optimized solutions of consistently high quality.
Their wide portfolio of temperature sensors covers countless applications. Additionally, their experienced engineering department develops customized products designed specifically for your application.
And they didn’t just start doing this yesterday: as a temperature sensor manufacturer with 250+ employees, they have been dedicated to the development and production of temperature probes since 1978.
![italcoppie-logo-250px italcoppie-logo-250px](https://belltechnology.co.nz/wp-content/uploads/2023/08/italcoppie-logo-250px.png)
![italcoppie-temperature-probes italcoppie-temperature-probes](https://belltechnology.co.nz/wp-content/uploads/2023/08/italcoppie-temperature-probes.webp)
Pt100 Probes
Pt100 is a very popular and precise resistance thermometer. Pt is for Platinum, which the resistor is made of. 100 is for its resistance of 100 Ohms at 0 °C. As with all resistance temperature detectors (RTD), the sensing elements changes its electrical resistance with changing temperature.
- Pt100 probes are linear and accurate in a wide temperature range.
- The temperature range of Pt100 temperature sensors extends from -50 to +500 °C.
- Outside of this range, we recommend the use of a thermocouple.
- The optimum diameter of Pt100 probes is 3 mm, but we can reduce it to 1.5 mm.
- For smaller diameters, again, we recommend to use a thermocouple.
- As opposed to thermocouples, you don’t need compensated leads with a Platinum RTD.
![TRM-1-1 Threaded Pt100 RTD probe, M12 connector Series: TRC Measuring range: -50 to 120 °C Sensor: Pt100 Class A/B Connection: 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/08/TRM-1-1.webp)
![trc_giusta_proporzione Threaded Pt100 RTD probe, M12 connectorSeries: TRC
Measuring range: -50 to 120 °C
Sensor: Pt100 Class A/B
Connection: 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/08/trc_giusta_proporzione.webp)
![TRE_corretta Mineral insulated Pt100 RTD, overmoulded transitionSeries: TRECOSTP
Measuring range: -50 to 500 °C
Sensor: Pt100 Class AA/A/B
Connection: 2, 3 or 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/08/TRE_corretta.webp)
![TRSV8 Mineral insulated Pt100 RTD probe, M8 connectorSeries: TRSV8
Measuring range: -50 to 500 °C
Sensor: Pt100 Class A/B
Connection: 3 wires](https://belltechnology.co.nz/wp-content/uploads/2023/08/TRSV8.webp)
![Black cable probe made from TPE Pt100 RTD cable probe with overmoulded sensing element, waterproof (IP68)
Series: IKE4
Measuring range: -40 to 105 °C
Sensor: Pt100 Class A/B
Connection: 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Black-cable-probe-made-from-TPE.webp)
![Mineral insulated probe with built-in temperature transmitter Pt100 Transmitter 4-20mA integrated with mineral insulated RTD probe
Series: EVOXI
Measuring range: -50 to 500 °C
Sensor: 4-20 mA
Connection: 2 wire current loop](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-probe-with-built-in-temperature-transmitter.webp)
![Mineral insulated probe with built-in temperature transmitter 0-10 V Pt1000 Transmitter 0-10V integrated with mineral insulated RTD probe
Series: EVOMINIV
Measuring range: -50 to 500 °C
Sensor: 0-10 V
Connection: 3 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-probe-with-built-in-temperature-transmitter-0-10-V.webp)
![Pt100 stator stick probe for temperature measurement Pt100 stator winding RTD for electric motors and generators
Series: A076005A
Measuring range: -10 to 150 °C
Sensor: one or two Pt100
Connection: 3 or 6 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Pt100-stator-stick-probe-for-temperature-measurement.webp)
Pt1000 Probes
The Pt1000 is closely related to the Pt100, the most popular resistance thermometer. Pt is for Platinum, which the resistor is made of. 1000 is for its resistance of 1000 Ohms at 0 °C. As with all resistance temperature detectors (RTD), the sensing element changes its electrical resistance with changing temperature.
- The Pt1000 has the same linearity as the Pt100, but it has 10x the signal strength.
- It is accurate in a wide temperature range.
- These characteristics make a Pt1000 a good choice when the range of an NTC is too small and the signal of a Pt100 is too weak.
- The temperature range of Pt1000 temperature sensors extends from -50 to +500 °C.
- Outside of this range, we recommend the use of a thermocouple.
- The minimum diameter of Pt1000 probes is typically 3 mm.
- If you require a smaller diameter, we recommend to use a Pt100 or a thermocouple.
![Mineral insulated temperature probe with overmoulded M12 connector Mineral insulated Pt1000 RTD probe, M12 connector
Series: TRMSTD
Measuring range: -50 to 500 °C
Output: Pt1000 Class AA/A/B
Connection: 2, 3 or 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-temperature-probe-with-overmoulded-M12-connector.webp)
![Mineral insulated temperature probe with overmoulded transition Mineral insulated Pt1000 RTD, overmoulded transition
Series: TRECOSTP
Measuring range: -50 to 500 °C
Output: Pt1000 Class AA/A/B
Connection: 2, 3 or 4 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-temperature-probe-with-overmoulded-transition.webp)
![Mineral insulated temperature probe with overmoulded M8 connector Mineral insulated Pt1000 RTD probe, M8 connector
Series: TRSV8
Measuring range: -50 to 500 °C
Output: Pt1000 Class A/B
Connection: 3 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-temperature-probe-with-overmoulded-M8-connector.webp)
![Black cable probe made from TPE. Overmoulded sensing element Pt1000 RTD cable probe, overmoulded, IP68
Series: IKE2
Measuring range: -40 to 105 °C
Output: Pt1000 Class A/B
Connection: 2 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Black-cable-probe-made-from-TPE.-Overmoulded-sensing-element.webp)
![Mineral insulated probe with built-in temperature transmitter 4-20mA Pt1000 Transmitter 4-20mA integrated with mineral insulated RTD probe
Series: EVOXI
Measuring range: -50 to 500 °C
Output: 4-20 mA
Connection: 2 wire current loop](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-probe-with-built-in-temperature-transmitter-4-20mA.webp)
![Pt1000 Mineral insulated probe with built-in temperature transmitter 0-10 V Pt1000 Transmitter 0-10V integrated with mineral insulated RTD probe
Series: EVOMINIV
Measuring range: -50 to 500 °C
Output: 0-10 V
Connection: 3 wires](https://belltechnology.co.nz/wp-content/uploads/2023/09/Pt1000-Mineral-insulated-probe-with-built-in-temperature-transmitter-0-10-V.webp)
K-Type Thermocouple
A thermocouple puts out a voltage signal related to the temperature difference between to points. It has no dedicated sensing element but instead consists of two joint wires made from different metals. In case of the type K thermocouple, one wire is made of chromel and the other wire is made of alumel.
- Thermocouples are the simplest sensors in the world – what is easier than just putting two wires together?
- A thermocouple is physically very robust and can measure in an extremely wide temperature range (up to 1,150 °C for type K). It can also be built in miniature diameters as small as 0.25 mm.
- As opposed to RTD like Pt100 and Pt1000, wire length and wire diameter do not cause measurement errors with thermocouples.
Generally speaking, a thermocouple’s signal is much weaker than that of an RTD. This makes it more sensitive to electrical interference. Also, if you require a high resolution, it may not be the best choice. An important advantage of the type K over the type J thermocouple is that its leads are resistant to oxidation.
![Mineral insulated K type thermocouple with overmoulded standard connector Mineral insulated K Type thermocouple, overmoulded standard connector
Series: TCM
Measuring range: up to 1,150 °C
Sensor: Type K
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-K-type-thermocouple-with-overmoulded-standard-connector.jpg)
![A K Type Thermocouple made from mineral insulated cable with an overmoulded black M12 connector Mineral insulated K Type thermocouple, overmoulded M12 connector
Series: TCSV12
Measuring range: up to 1,150 °C
Sensor: Type K
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/A-K-Type-Thermocouple-made-from-mineral-insulated-cable-with-an-overmoulded-black-M12-connector.webp)
![Mineral insulated K type thermocouple with overmoulded M8 connector Mineral insulated K Type thermocouple, overmoulded M8 connector
Series: TCSV8
Measuring range: up to 1,150 °C
Sensor: Type K
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-K-type-thermocouple-with-overmoulded-M8-connector.webp)
![Mineral insulated K type miniature thermocouple with overmolded miniature connector Mineral insulated K Type thermocouple, overmoulded miniature connector
Series: TCOSTD
Measuring range: up to 1,150 °C
Sensor: Type K
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-K-type-miniature-thermocouple-with-overmolded-miniature-connector.webp)
![Mineral insulated K type thermocouple with overmoulded cable transition Mineral insulated K Type thermocouple, overmoulded cable transition
Series: TCEPAK
Measuring Range: up to 1,150 °C
Sensor: Type K
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-K-type-thermocouple-with-overmoulded-cable-transition.webp)
![Mineral insulated temperature probe with connection head Mineral insulated K Type thermocouple with connection head
Series: ATITC
Measuring Range: up to 1,150 °C
Sensor: Type K
Connection: DIN B connection head](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-temperature-probe-with-connection-head.webp)
J-Type Thermocouple
A thermocouple puts out a voltage signal related to the temperature difference between to points. It has no dedicated sensing element but instead consists of two joint wires made from different metals. In case of the type J thermocouple, one wire is made of iron and the other wire is made of constantan.
- A thermocouple is physically very robust and can measure in a wide temperature range.
- It can also be built in miniature diameters as small as 0.25 mm.
- As opposed to RTD like Pt100 and Pt1000, wire length and wire diameter do not cause measurement errors with thermocouples.
Generally speaking, a thermocouple’s signal is much weaker than that of an RTD. This makes it more sensitive to electrical interference. Also, if you require a high resolution, it may not be the best choice. A specific delicacy of the J Type thermocouple is that its leads are prone to oxidation.
![Mineral insulated J type thermocouple with overmoulded standard connector Mineral insulated Type J thermocouple, overmoulded standard connector
Series: TCM
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-J-type-thermocouple-with-overmoulded-standard-connector.webp)
![A J Type Thermocouple made from mineral insulated cable with an overmoulded black M12 connector Mineral insulated Type J thermocouple, overmoulded M12 connector
Series: TCSV12
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/A-J-Type-Thermocouple-made-from-mineral-insulated-cable-with-an-overmoulded-black-M12-connector.webp)
![Mineral insulated J type thermocouple with overmoulded M8 connector Mineral insulated Type J thermocouple, overmoulded M8 connector
Series: TCSV8
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-J-type-thermocouple-with-overmoulded-M8-connector.webp)
![Mineral insulated J type miniature thermocouple with overmolded miniature connector Mineral insulated Type J thermocouple, overmoulded miniature connector
Series: TCOSTD
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-J-type-miniature-thermocouple-with-overmolded-miniature-connector.webp)
![Mineral insulated J type thermocouple with overmoulded cable transition Mineral insulated Type J thermocouple, overmoulded cable transition
Series: TCEPAJ
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-J-type-thermocouple-with-overmoulded-cable-transition.webp)
![Special J type thermocouple for hot runner systems with high temperature resistant cable transition Mineral insulated thermo-couple, high temp and high pull strength transition
Series: TCTX
Measuring range: up to 600 °C
Sensor: Type J
Connection: compensated](https://belltechnology.co.nz/wp-content/uploads/2023/09/Special-J-type-thermocouple-for-hot-runner-systems-with-high-temperature-resistant-cable-transition.webp)
NTC Probes
An NTC is a semiconductor-based temperature sensor from the family of thermistors. NTC stands for “negative temperature coefficient”. The electrical resistance decreases exponentially with increasing temperature. This makes one of the most important differences compared to a linear probe like a Pt1000.
- Within a small temperature range – somewhere between -50 to 150 °C depending on the exact model – NTC have a high resolution and thus relatively high accuracy.
- They are also cheap and due to their high resistance values, you can use them with cables of any length as the cable resistance does not affect the measurement significantly.
- NTC are not standardized, so finding the right model may be a challenge which we are happy to help you with.
![NTC cable probe assembly with metal tube silicone cable NTC cable probe assembly with metal tube, silicone cable
Series: FTR2SIL
Measuring Range: -50 to 180 °C
Sensor: NTC, Pt100 or Pt1000
Cable Material: Silicon](https://belltechnology.co.nz/wp-content/uploads/2023/09/NTC-cable-probe-assembly-with-metal-tube-silicone-cable.webp)
![NTC cable probe with overmoulded sensing element NTC cable probe with overmoulded sensing element, waterproof (IP68)
Series: IKE2
Measuring Range: -40 to 105 °C
Sensor: NTC, Pt100 or Pt1000
Cable Material: TPE](https://belltechnology.co.nz/wp-content/uploads/2023/09/NTC-cable-probe-with-overmoulded-sensing-element.webp)
![NTC cable probe with overmoulded sensing element IP67 NTC cable probe with overmoulded sensing element, IP67
Series: IKS
Measuring Range: -40 to 105 °C
Sensor: NTC, Pt100 or Pt1000
Cable Material: TPE](https://belltechnology.co.nz/wp-content/uploads/2023/09/NTC-cable-probe-with-overmoulded-sensing-element-IP67.webp)
![White cable probe made from TPC Overmoulded sensing element NTC cable probe with overmoulded sensing element, IP67
Series: IHS
Measuring Range: -30 to 150 °C
Sensor: NTC, Pt100 or Pt1000
Cable Material: TPC](https://belltechnology.co.nz/wp-content/uploads/2023/09/White-cable-probe-made-from-TPC-Overmoulded-sensing-element.webp)
![NTC pipe temperature sensor for direct mount on pipes NTC pipe temperature sensor for direct mount on pipes, IP67
Series: ICSKIN
Measuring Range: -40 to 85 °C
Sensor: NTC, Pt100 or Pt1000
Cable Material: TPE](https://belltechnology.co.nz/wp-content/uploads/2023/09/NTC-pipe-temperature-sensor-for-direct-mount-on-pipes.webp)
![Threaded NTC probe assembly overmoulded cable transition Threaded NTC probe assembly, overmoulded cable transition
Series: C115011B
Measuring Range: up to 150 °C
Sensor: NTC
Thread: G1/8](https://belltechnology.co.nz/wp-content/uploads/2023/09/Threaded-NTC-probe-assembly-overmoulded-cable-transition.webp)
![Threaded NTC probe assembly overmoulded M12 Threaded NTC probe assembly, overmoulded M12 connector
Series: B049017A
Measuring Range: -50 to +120 °C
Sensor: NTC 2.252K
Thread: G1/8](https://belltechnology.co.nz/wp-content/uploads/2023/09/Threaded-NTC-probe-assembly-overmoulded-M12.webp)
Temperature Transmitters
A temperature transmitter is a device that amplifies and standardizes the output signal of a temperature sensor. It is typically mounted directly on top of the probe – traditionally in the connection head. We have revolutionized the world of temperature transmitters with the our EVO series: these transmitters are as small as a thumb and come either as a standalone device or directly integrated with a temperature probe. They put out either a 4…20mA or a 0…10V signal.
Compact Temperature Transmitters
The compactness of our transmitters allows installation in even the smallest spaces. The connection is simple with the integrated M12 connectors. For our probes with integrated transmitters, we mould the transmitter itself directly onto a mineral insulated probe. As an added bonus, this combination allows to compensate the probe errors and thus improves accuracy.
For the highest level of accuracy and connectivity, check out our digital MODBUS temperature sensors and converters.
4-20mA Output Signal
![Compact 4-20mA transmitter with one female and one male M12 connector RTD converter for Pt100/Pt1000, 4-20mA
Series: EVOXC
Measuring range: -200 to 800 °C
Output: Pt100/Pt1000 4-20mA
Connection: 2x M12 connectors](https://belltechnology.co.nz/wp-content/uploads/2023/09/Compact-4-20mA-transmitter-with-one-female-and-one-male-M12-connector.webp)
![Threaded Pt100 probe integrated 4-20mA transmitter Threaded Pt100 probe, integrated 4-20mA transmitter
Series: EVOXTP
Measuring range: -50 to 110 °C
Output: Pt100 4-20mA
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Threaded-Pt100-probe-integrated-4-20mA-transmitter.webp)
![Mineral insulated Pt100 integrated 4-20mA transmitter Mineral insulated Pt100, integrated 4-20mA transmitter
Series: EVOXI
Measuring range: -50 to 500 °C
Output: Pt100 4-20mA
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-Pt100-integrated-4-20mA-transmitter-.webp)
![RTD converter for Pt100 Pt1000, 4-20mA metal body RTD converter for Pt100/Pt1000, 4-20mA, metal body
Series: EVOXCM
Measuring range: -200 to 800 °C
Output: Pt100/Pt1000 4-20 mA
Connection: 2x M12 connectors](https://belltechnology.co.nz/wp-content/uploads/2023/09/RTD-converter-for-Pt100-Pt1000-4-20mA-metal-body-1.webp)
![RTD converter for Pt100 Pt1000 4-20mA metal body Threaded Pt100 probe, integrated 4-20mA transmitter, metal body
Series: EVOXTM
Measuring Range: -50 to 110°C
Output: 4-20 mA
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/RTD-converter-for-Pt100-Pt1000-4-20mA-metal-body.webp)
![Pt100 RTD probe assembly with integrated 4-20mA transmitter metal body Pt100 RTD probe assembly with integrated 4-20mA transmitter, metal body
Series: EVOXF
Measuring Range: -50 to 300 °C
Output: 4-20 mA
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Pt100-RTD-probe-assembly-with-integrated-4-20mA-transmitter-metal-body.webp)
0-10V Output Signal
![Threaded Pt1000 probe integrated 0-10V transmitter Threaded Pt1000 probe, integrated 0-10V transmitter
Series: EVOMINIVatT
Measuring range: -50 to 110 °C
Output: Pt1000 0-10V
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Threaded-Pt1000-probe-integrated-0-10V-transmitter.webp)
![Mineral insulated Pt1000 integrated 0-10V transmitter Mineral insulated Pt1000, integrated 0-10V transmitter
Series: EVOMINIV
Measuring Range: -50 to 500 °C
Output: Pt1000 0-10 V
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-Pt1000-integrated-0-10V-transmitter.webp)
Modbus Temperature Sensors
A MODBUS temperature sensor is a temperature sensor paired with a digital transmitter. It can communicate with a master unit by the digital MODBUS protocol.
Why Should You Use MODBUS?
With our MODBUS RTU sensors and transmitter modules, you can connect several devices in a line, occupying only one input of your PLC. In addition, you save the expensive analog input cards for your PLC, since most of them already have a serial RS485 interface. Moreover, you can access multiple measured values per device. This not only enables the use of a combined RS485 temperature humidity sensor; but also the access of valuable service data that can be useful for predictive maintenance.
![MODBUS RTD transmitter module for Pt100 Pt1000 MODBUS RTD transmitter module for Pt100/Pt1000
Series: EVO040
Measuring range: -200 to 850 °C
Protocol: MODBUS RTU (RS485)
Connection: 2x M12 connectors](https://belltechnology.co.nz/wp-content/uploads/2023/09/MODBUS-RTD-transmitter-module-for-Pt100-Pt1000-.webp)
![RS485 temperature sensor Pt100 MODBUS RTU Pt100 MODBUS RTU with threaded process connection
Series: ESTP
Measuring range: -50 to 110 °C
Protocol: MODBUS RTU (RS485)
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/RS485-temperature-sensor-Pt100-MODBUS-RTU.webp)
![Pt100 MODBUS RTU with mineral insulated probe Pt100 MODBUS RTU with mineral insulated probe
Series: EOSI
Measuring range: -50 to 500 °C
Protocol: MODBUS RTU (RS485)
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Pt100-MODBUS-RTU-with-mineral-insulated-probe.webp)
![I2C MODBUS Converter Module I2C to MODBUS converter module for sensors
Series: EVO032
Measuring range: -/-
Protocol: MODBUS RTU (RS485)
Connection: 2x M12 connectors](https://belltechnology.co.nz/wp-content/uploads/2023/09/I2C-MODBUS-Converter-Module.webp)
![I2C temperature humidity sensor for MODBUS converter I2C temperature humidity sensor (IP67)
Series: EVO033
Temperature: -40 to 125 °C
Humidity: 0 to 100% RH
Protocol: I2C
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/I2C-temperature-humidity-sensor-for-MODBUS-converter.webp)
![I2C ambient light sensor I2C ambient light sensor
Series: EVO035
Measuring Range: 0 to 167 lx
Protocol: I2C
Connection: M12 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/I2C-ambient-light-sensor.webp)
Temperature Probes for Food
When working with food in catering and industry, temperature probes must meet the highest hygienic requirements. Italcoppie manufacture all their cooking probes and refrigeration probes in accordance with the EC Directive 1935/2004 for food contact materials.
Penetration Probe, Needle Probe
For both cooking and blast chilling, the exact determination of the internal temperature is crucial. Therefore, they equip their penetration probes with accurate resistance sensors such as Pt100 and Pt1000. Depending on your desired temperature range, different materials are used on the handle and cable of the probe, all of which are suitable for food contact.
Extreme Heat or Extreme Cold
For refrigeration applications as well as temperature measurement in ovens or deep fryers, Italcoppie recommend their extremely robust mineral insulated resistance thermometers. Of course, these are also suitable for food contact.
Penetration Probes, Needle Probes
![Heatable food temperature probe for blast chilling with TPE handle Heatable food temperature probe for blast chilling with TPE handle
Series: N033008A
Temperatures: -40 to 100 °C
Sensor: Pt1000
Materials: AISI 316, TPE](https://belltechnology.co.nz/wp-content/uploads/2023/09/Heatable-food-temperature-probe-for-blast-chilling-with-TPE-handle.webp)
![Food temperature probe for use in ovens with polymer handle IP67 Food temperature probe for use in ovens with polymer handle, IP67, FDA approved
Series: P078006A
Temperatures: 260 °C; 300 °C peak
Sensor: Pt1000
Materials: AISI 316, polymer](https://belltechnology.co.nz/wp-content/uploads/2023/09/Food-temperature-probe-for-use-in-ovens-with-polymer-handle-IP67.webp)
![Food temperature probe for use in ovens with silicone handle Food temperature probe for use in ovens with silicone handle
Series: TRPSIL
Temperatures: -50 to 180 °C
Sensor: Pt100 or Pt1000
Materials: vulcanised silicone](https://belltechnology.co.nz/wp-content/uploads/2023/09/Food-temperature-probe-for-use-in-ovens-with-silicone-handle.webp)
![Wireless food temperature probe IP67 4 measuring points Wireless food temperature probe (IP67), 4 measuring points, for refrigeration
Series: EVO014
Measuring range: -40 to 85 °C
Sensor: 4 sensors
Connection: AISI 316L, PP, POM-C](https://belltechnology.co.nz/wp-content/uploads/2023/09/Wireless-food-temperature-probe-IP67-4-measuring-points.webp)
Temperature Sensors for Ovens, Deep Fryers, Refrigeration
![Mineral insulated RTD probe with overmoulded M12 connector IP67 Mineral insulated RTD probe with overmoulded M12 connector (IP67)
Series: TRMSTD
Temperatures: -50 to 500 °C
Sensor: Pt100 or Pt1000
Materials: AISI 316L, polyamide](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-RTD-probe-with-overmoulded-M12-connector-IP67.webp)
![Mineral insulated RTD probe with overmoulded M8 connector IP67 Mineral insulated RTD probe with overmoulded M8 connector (IP67)
Series: TRSV8
Temperatures: -50 to 500 °C
Sensor: Pt100 or Pt1000
Materials: AISI 316L, polyamide](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-RTD-probe-with-overmoulded-M8-connector-IP67.webp)
![Mineral insulated RTD probe with overmoulded cable transition Mineral insulated RTD probe with overmoulded cable transition
Series: TRECOSTP
Temperatures: -50 to 500 °C
Sensor: Pt100 or Pt1000
Materials: AISI 316L, polyamide](https://belltechnology.co.nz/wp-content/uploads/2023/09/Mineral-insulated-RTD-probe-with-overmoulded-cable-transition.webp)
Inline Temperature Probe
![Inline Temperature Sensor for Flow Temperature Measurement in Plastic Tubing Inline Temperature Sensor for Flow Temperature Measurement in Plastic Tubing
Series: TBT18G
Measuring range: 0 to 100 °C
Sensor: Pt100, Pt1000 or NTC
Connection: M8 connector](https://belltechnology.co.nz/wp-content/uploads/2023/09/Inline-Temperature-Sensor-for-Flow-Temperature-Measurement-in-Plastic-Tubing-.webp)