Digital Barometer
A desktop precise digital barometer with a wide measuring range of 600 to 1100 hPa.
Traceable calibration, JCSS-certified calibration (JCSS is an official authority acquired ILAC MRA), and JMA (Japan Meteorological Agency) certification are available.
- An extremely precise barometer alternate to a conventional mercury Fortin barometer
- Wide measuring range of 600 to 1100 hPa
- Vivid red LED display for readability
- Various arithmetic functions: minimum, maximum, average, and relative value
- RS-232C output for PC and printer. Equipped with an RS-232C terminal. Data can be printed out in real time if the optional printer (Cat. No. 7630-60) is connected.
- Upper and lower limit alarms. Equipped with a contact output that can be connected to an external alarm device such as a buzzer and revolving light. Upper and lower alarm values can be set separately.
- Pressure port in the back
Handheld Anemometer
A portable anemometer made up of a separatable sensor and indicator, which makes it capable of remote measurement.
This hand-held anemometer is made up of a separatable cup-shaped sensor and indicator, which makes it capable of remote measurement if you disconnect the sensor and the indicator and reconnect them via cable. A generator is contained in the sensor to transform the rotation of cups to electricity for the indicator so that the device operates without power.
The indicator is supported by an internal vibration reducer to minimize the reading error of the indicator needle.
Hand Held Combination Anemometer
A portable vane and anemometer made up of a separatable sensor and indicator, which makes it capable of remote measurement
This hand-held combination anemometer is made up of a separatable sensor and indicator, which makes it capable of remote measurement if you disconnect the sensor and the indicator and reconnect them via cable. A generator is contained in the sensor to transform the rotation of cups to electricity for the indicator so that the device operates without power.
The indicator is supported by an internal vibration reducer to minimize the reading error of the indicator needle.
3-Cup Anemometer
Install the sensor outdoors and the indicator indoors, then you can remotely read instantaneous wind speed easily. No power required.
Wind Speed and Direction Indicator with Sensor
This is an analog rigid wind monitoring system consists of a rugged vane sensor and an antique-style indicator that both wind speed and direction can be read simultaneously.
Suitable for general meteorological observations, in construction sites or high-rise buildings.
Wind Speed Sensor
A wind speed sensor to display digital data and output alerts.
* Indicator WAT6D0-3-00 (Cat. No. 7915-50) must be purchased together.
- The indicator receives the signals from this sensor and displays instantaneous and mean values of wind speed digitally. Alarms can be set at your will and is output as a relay contact, hazard lamp, and a buzzer. Furthermore, analog and RS-422 digital output to external devices are available on inquiry.
- This lightweight, durable, and stable sensor generates voltage itself by rotation of the three-cup anemometer to output to the indicator.
- Instantaneous and mean wind speed are indicated as digital figures on the indicator.
- Three step of alarm can be set. When the measured value reaches the threshold all of the relay contact, hazard lamp, and buzzer are activated.
Tipping Bucket Rainfall Sensor
This instrument outputs one contact pulse per 0.5 mm of rainfall, connected with Event Recorder (Cat. No. 7820-00) or Digital Rainfall Indicator with Alarm (Cat. No. 7821-50) sold separately.
