CANline 04 Control centre
CANline 04 Central ER
CANLINE 04 Control Centre
- The CANline 04 central unit is used to display the measured gas concentrations and to control the connected devices.
- A maximum of four analog or digital gas measurement transmitters can be connected
- Up to 4 different limit values can be freely programmed for each gas measurement transmitter and individually assigned to one or more of the 5 built-in relays
- A maximum of 32 relay contacts can be connected
- Different measuring ranges programmable
- Different relay functions programmable (RESET holding or resetting, NC or NO contact, max. active time, etc.)
- The CANline 04 can be mounted in the switch cabinet, in the switch cabinet door (ER version) or directly on a wall
- User-friendly programming via buttons without PC (code-protected) or via configuration software (Windows)
- History function: registered alarms and faults can be read on the display in the menu
- Integrated MODBUS-RTU interface
- Optional 230 VAC
- Swiss quality product
CANLINE 10 Control Centre
- The CANline 10 central unit is used to display the measured gas concentrations and control the connected devices.
- A maximum of 10 analog or digital gas measurement transmitters can be connected
- Up to 4 different limit values can be freely programmed for each gas measurement transmitter and individually assigned to one or more of the 5 built-in relays
- A maximum of 32 relay contacts can be connected
- Different measuring ranges programmable
- Different relay functions programmable (RESET holding or resetting, NC or NO contact, max. active time, etc.)
- The CANline 10 can be mounted in the switch cabinet, in the switch cabinet door (ER version) or directly on a wall
- User-friendly programming via configuration software (Windows)
- History function: registered alarms and faults can be read on the display in the menu
- Integrated MODBUS-RTU interface
- Optional 230 VAC
- Swiss quality product
CANline 10 control centre
CANline 10 Central ER
CANline 32+ control centre
CANline 32+ Central ER
CANLINE 32+ Control Centre
- The CANline 32+ central unit is used to display the measured gas concentrations and control the connected devices.
- A maximum of four analog gas measurement transmitters can be connected to the CANline 32+ central unit or 32 gas measurement transmitters can be connected in the BUS.
- Up to 4 different limit values can be freely programmed per sensor and individually assigned to one or more of the 8 built-in relays
- 96 additional gas measurement transmitters and (3×32) relay contacts can be connected via max. 3 CANline bus extenders
- Different measuring ranges programmable
- Different relay functions programmable (RESET holding or resetting, NC or NO contact, max. active time, etc.)
- The CANline 32+ can be mounted in the switch cabinet, in the switch cabinet door (ER version) or directly on a wall
- User-friendly programming via configuration software (Windows)
- History function: registered alarms and faults can be read on the display in the menu
- Integrated MODBUS-RTU interface
- Optional 230 VAC
- Swiss quality product
PS 2020 controller
For ventilation control in underground garages
The controller has been developed for ventilation control in underground garages. The controller has the necessary on/off delays integrated
- Concentration measurement using gas measuring transmitter e.g. PSEC 504 / 684
- Timer with 4 programmable switching times, integrated
- 17 ... 24 VDC
- max. 70mA
- 24 VDC, 1 Amp., fused with self-resetting
fuse, SRS - Switching outputs Fault
- Fault relay with potential-free switching contact
- 230 VAC / T1 Amp.
- CAN-BUS 4-wire shielded
Controller PS 2020
Controller PS 2020 ER