Cooled Incubators (ST)
Cooled incubators (ST) can provide a stable temperature between +3...+70°C regardless of ambient conditions.
Cooled incubators (ST) is a thermostatic device designed to store samples at a specific temperature. Cooled incubators (ST) have a heating system and a cooling system, so samples can be stored/incubated above or below ambient temperature.
Cooled incubators (ST) manufactured by POL-EKO have internal LED lighting. For security purposes, the chamber door (solid) is lockable. All cabinet models are available in Smart and Smart PRO controller versions.
Cooled incubators (ST) can be used for stability testing with high temperature accuracy. A common application is also the use of cabinets to store vaccines and medicines in refrigerated conditions and medicines between +18°C and +20°C (in places where there is no air conditioning and in summer the air temperature is much higher than the room temperature that is recommended for storing some medicines).
Cooled incubators (ST) are available in 3-chamber versions (model ST 1/1/1) and 2-chamber versions (models ST 1/1, ST 2/2, ST 3/2), where each chamber is controlled independently. This solution saves space in the lab and allows testing at two different temperatures. Multi-chamber devices may be available in so-called mixed versions, e. g. a thermostatic cabinet and laboratory refrigerator or a thermostatic cabinet and freezer, where each chamber is also independently controlled
Single Chamber Thermostatic Cabinets
Cooled incubators (ST) are the most economical solution for laboratories where many examinations and tests are performed with the necessity of incubating samples at a certain temperature. Single compartment units are available in 10 sizes with a usable volume of 55 to 1525 liters.
ST 1
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 70 liters
- working capacity 55 liters
- quality control protocol (in +37°C)
ST 2
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 150 liters
- working capacity 122 liters
- quality control protocol (in +37°C)
ST 3
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 200 liters
- working capacity 163 liters
- quality control protocol (in +37°C)
ST 4
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 250 liters
- working capacity 203 liters
- quality control protocol (in +37°C)
ST 5
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 300 liters
- working capacity 243 liters
- quality control protocol (in +37°C)
ST 6
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 400 liters
- working capacity 324 liters
- quality control protocol (in +37°C)
ST 500
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 500 liters
- working capacity 469 liters
- quality control protocol (in +37°C)
ST 700
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 625 liters
- working capacity 611 liters
- quality control protocol (in +37°C)
ST 1200
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 1365 liters
- working capacity 1355 liters
- quality control protocol (in +37°C)
ST 1450
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 1540 liters
- working capacity 1525 liters
- quality control protocol (in +37°C)
Multi-Chamber Thermostatic Cabinets
You can combine an ST cooled incubator with a CHL refrigerator (in the same version – BASIC/COMFORT/PREMIUM) and a ZLN 85+ freezer to have a double chamber unit.
There are also triple chamber units such as ST1/1/1 and CHL 1/1/1. You can combine 2 chambers of ST 1 with 1 chamber of CHL 1 and vice-versa.
ST 1/1
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 70/70 liters
- working capacity 55/55 liters
- quality control protocol (in +37°C)
ST 1/1/1
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 70/70/70 liters
- working capacity 55/55/55 liters
- quality control protocol (in +37°C)
ST 2/2
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 150/150 liters
- working capacity 122/122 liters
- quality control protocol (in +37°C)
ST 2/3
- temperature range +3…+40°C (+70°C in Smart PRO)
- chamber capacity 150/200 liters
- working capacity 122/163 liters
- quality control protocol (in +37°C)
Multi-Chamber Devices Mixed
Multi-chamber thermostatic cabinets are a combination of a thermostatic cabinet ST with a laboratory refrigerator CHL or a laboratory freezer ZLN 85
As is the case with the two- and three-chamber devices of the same type, in this case too, each chamber has an independent control and can be individually equipped with a number of additional options and accessories.
Cooled incubator (ST) with freezer ST2/ZLN85
- temperature range +3…+40°C (+70°C in Smart PRO) / -25...0°C
- chamber capacity 150/85 liters
- working capacity 122/73 liters
- quality control protocol (in +37°C / -20°C)
Cooled Incubator (ST) with freezer ST3/ZLN85
- temperature range +3…+40°C (+70°C in Smart PRO) / -25...0°C
- chamber capacity 200/85 liters
- working capacity 163/73 liters
- quality control protocol (in +37°C / -20°C)
Cooled Incubator (ST) with refrigerator ST2/CHL2
- temperature range +3…+40°C (+70°C in Smart PRO) / 0…+15°C
- chamber capacity 150/150 liters
- working capacity 122/122 liters
- quality control protocol (in +37°C / +4°C)
Cooled incubator (ST) with refrigerator ST3/CHL2
- temperature range +3…+40°C (+70°C in Smart PRO) / 0…+15°C
- chamber capacity 200/150 liters
- working capacity 163/122 liters
- quality control protocol (in +37°C / +4°C)
Cooled incubator (ST) with refrigerator ST2/CHL3
- temperature range +3…+40°C (+70°C in Smart PRO) / 0…+15°C
- chamber capacity 150/200 liters
- working capacity 122/163 liters
- quality control protocol (in +37°C / +4°C)
BOD Incubators
Brand NEW BOD incubators for Oxi-Top® system ST BD series.
The ST BD incubators come with 230V internal sockets and have been designed to suit 2, 3 or 4 sets of WTW OxiTop® IS 12 (depending on the model).
BOD Incubators are available in 3 sizes of chambers: 150, 250 and 300 litres capacity. All have forced air circulation and full exterior door. Chambers are made in version B (basic) - the interior is made of aluminium, casing of powder-coated sheet. The entire ST BD range is offered with Smart controllers.
BOD Incubator ST BD 2
- Smart controller
- heating and cooling system
- temperature range +3…+40°C
- chamber capacity 150 liters
- working capacity 122 liters
BOD Incubator ST BD 4
- Smart controller
- heating and cooling system
- temperature range +3…+40°C
- chamber capacity 250 liters
- working capacity 203 liters
BOD Incubator ST BD 5
- Smart controller
- heating and cooling system
- temperature range +3…+40°C
- chamber capacity 300 liters
- working capacity 243 liters
Cooled Incubators (IL)
USED FOR MICROBIOLOGICAL TESTS
Cooled incubators are perfect for incubation of samples in a stable environment, regardless of ambient conditions, at the temperature from -10 up to +100°C.
Cooled incubators can be equipped with Smart or Smart PRO controller which allow to program time-temperature profiles, carry out incubations at different temperatures and simulate the processes occurring when changing the temperature of samples.
Cooled incubators IL manufactured by POL-EKO are equipped with double door with lock. All units have an access port for inserting an external sensor placed on the side wall. The interior of the chamber is made of acid-resistant stainless steel, which makes it easy to clean.
- The ILW cooled incubators are only available in a forced-air version. These are devices have no ventilation chimney.
- The ILW incubators can be optionally equipped with a photoperiod or phytotron function, allowing to control not only temperature but also lighting, simulating day/night conditions.
- POL-EKO offers 5 models of incubators with capacities from 56 to 749 liters.
Cooled Incubator (IL) ILW 53
- temperature range 0…+70°C / -10 (option) / ... +100°C (Smart PRO)
- chamber capacity 56 liters
- working capacity 56 liters
Cooled Incubator (IL) ILW 115
- temperature range 0…+70°C / -10 (option) / ... +100°C (Smart PRO)
- chamber capacity 112 liters
- working capacity 112 liters
Cooled Incubator (IL) ILW 240
- temperature range 0…+70°C / -10 (option) / ... +100°C (Smart PRO)
- chamber capacity 245 liters
- working capacity 245 liters
Cooled Incubator (IL) ILW 400
- temperature range 0…+70°C / -10 (option) / ... +100°C (Smart PRO)
- chamber capacity 424 liters
- working capacity 424 liters
Cooled Incubator (IL) ILW 750
- temperature range 0…+70°C / -10 (option) / ... +100°C (Smart PRO)
- chamber capacity 749 liters
- working capacity 749 liters
Peltier-Cooled Incubators
ECOLOGICAL AND ECONOMIC ALTERNATIVE TO ILW COOLED INCUBATORS
Innovative and ecological incubators ILP with cooling system based on the Peltier cell technology.
The most important advantages of incubators with ILP Peltier modules are:
no vibrations - through the use of Peltier cells, vibrations previously generated by the compressor are eliminated
Fluctuation and variation - the cooling system based on Peltier cells allows to achieve excellent fluctuation and variation additionally the time of reaching the set temperature, e. g. after opening the door, is much shorter
lighter and smaller design - Peltier cell cooling system reduces the size of the device and its weight
environmentally friendly - removing the compressor eliminates the use of refrigerant gases that have a negative impact on the environment
The ILP Peltier-cooled incubators are manufactured in 4 sizes, from 56 to 749 l. They are available in Smart and Smart PRO controller versions. The unit can be made of powder-coated sheet metal in light grey with a graphite extension (other colours according to RAL are available) or structural stainless steel (linen).
All Peltier-cooled laboratory incubators are equipped with an internal glass door to facilitate viewing of the load during the process (optionally, the unit may have an external door with a vision window so that processes can be observed without opening the door, as long as the research being conducted allows light to enter the chamber).
Peltier-Cooled Incubator ILP 53
- temperature range 0…+70°C (maximum 20°C below ambient temperature)
- chamber capacity 56 liters
- working capacity 56 liters
Peltier-Cooled Incubator ILP 115
- temperature range 0…+70°C (maximum 20°C below ambient temperature)
- chamber capacity 112 liters
- working capacity 112 liters
Peltier-Cooled Incubator ILP 240
- temperature range 0…+70°C (maximum 20°C below ambient temperature)
- chamber capacity 245 liters
- working capacity 245 liters
Peltier-Cooled Incubator ILP 750
- temperature range 0…+70°C (maximum 20°C below ambient temperature)
- chamber capacity 749 liters
- working capacity 749 liters
CO2 Incubators
OPTIMAL GROWTH CONDITIONS FOR CELL CULTURES
ILC 180 SMART PRO is the optimal solution for your laboratory!
The CO2 incubator is a unit designed to ensure optimal conditions for cell growth and tissue culture.
Very precise temperature control appropriate humidity and CO2 concentration are undeniable advantages of this product.
The CO2 incubator is equipped with the most advanced controller – SMART PRO which was created for the most demanding customers. The intuitive menu and user-friendly software are among the many advantages of the controller.
The ILC 180 SMART PRO incubator comprehensively protects the tested load and this enables hot air sterilization up to 180°C ensuring that each new test begins in a clean unit. The lack of a fan additionally eliminates the possibility of potential contamination of the samples and the design of the inner chamber of the incubator with rounded corners and edges allows for easy cleaning of the chamber. The internal glass door allows to view the load without the risk of changing the conditions in the chamber.
Save space in your laboratory
The ILC 180 SMART PRO Incubator is stackable. Two units can be stacked on top of each other. For this purpose the stacking optional adaptor is required. It prevents heat transmission, shocks and vibrations transferring from one chamber to another. The base on castors allows the incubator to be easily moved from one location to another. It is also recommended to avoid dirt from the floor potentially contaminating the chamber.
CO2 Incubator ILC 180
- rack for shelves
- stainless steel perforated shelf
- water pan
- key to the lock
- pressure gas hose with quick coupler socket and hose clamp for install pressure reducer
- ethernet cable
Laboratory Incubators
USED FOR INCUBATING THE SAMPLES
Laboratory incubators are thermostatic devices used to incubate samples in temperature conditions (up to a maximum of +100 °C)
Laboratory incubators are devices equipped only with a heater system (no cooling system). These devices maintain a constant temperature from 5 °C above the ambient temperature to maximum of 100 °C. Thus, these devices will allow proper testing under specific temperature conditions.
CL laboratory incubators are available with double door (external solid, internal glass). Optionally, the external door can be fitted with a vision window to allow observation of samples. In order to secure the cartridge, all doors are locked.The housing can be powder coated or made of structural stainless steel (linen). POL-EKO laboratory incubators are equipped with LAN port and USB port for efficient data transfer to external media. Laboratory incubators are distinguished by a microprocessor-based, large colour display available in Smart and Smart PRO options. Our offer includes incubators with natural or forced air circulation.
With Natural Air Convection
Laboratory incubators with natural air circulation are available in sizes from 15 to 245 liters. In appliances with natural air circulation, no fan is installed in the chamber. That makes these devices ideal for delicate materials, and those that too quickly lose the moisture through forced air circulation.
Laboratory Incubator CLN 15
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 15 liters
- working capacity 15 liters
- quality control protocol at + 37°C
Laboratory Incubator CLN 32
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 32 liters
- working capacity 32 liters
- quality control protocol at + 37°C
Laboratory Incubator CLN 53
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 56 liters
- working capacity 56 liters
- quality control protocol at + 37°C
Laboratory Incubator CLN 115
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 112 liters
- working capacity 112 liters
- quality control protocol at + 37°C
Laboratory Incubator CLN 180
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 180 liters
- working capacity 180 liters
- quality control protocol at + 37°C
Laboratory Incubator CLN 240
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 245 liters
- working capacity 245 liters
- quality control protocol at + 37°C
With Forced Air Convection
The forced-air laboratory incubators are available in 9 models from 15 to 1005 liters. As a result of fan(s) installed inside the chamber, devices are characterized by very good results of variation and fluctuation.
Laboratory Incubator CLW 15
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 15 liters
- working capacity 15 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 32
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 32 liters
- working capacity 32 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 53
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 56 liters
- working capacity 56 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 115
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 112 liters
- working capacity 112 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 180
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 180 liters
- working capacity 180 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 240
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 245 liters
- working capacity 245 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 400
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 424 liters
- working capacity 424 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 750
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 749 liters
- working capacity 749 liters
- quality control protocol at + 37°C
Laboratory Incubator CLW 1000
- temperature range + 5°C above ambient temperature ... + 100°C
- chamber capacity 1005 liters
- working capacity 1005 liters
- quality control protocol at + 37°C