Buffer Bottle
The LogTag® Buffer bottle is used where vaccines need to be monitored during storage or transport. It mirrors the temperature environment inside a vaccine vial, creating realistic temperature tracking data, which allow you to monitor that vaccines are not exposed to excessively high or low temperatures.
The Buffer bottle is compliant with the CDC requirements for vaccine storage monitoring.
It is used with LogTag® ST100K-15/30 probes connected to the Standard temperature loggers: TRED30-16R, UTRED/UTRED30 or TREX-8; and ST10M probes for the Low temperature loggers: TREL/TREL30 and UTREL/UTREL30 loggers.
Note: External Temperature Probe and Glycol not provided.
- Leak-proof vial cap
- Easily re-fillable
- Probe securely locked in vial
- Available in 35ml / 70ml bottle sizes
External Temperature Probes
For more information on LogTag’s wide range of probes & sensors, please refer to the brochure below.
ST100 External Probes
The ST100 probes are suitable for the LogTag® TREX, UTRED/UTRED30 and TRED30 models and measures a temperature range of -40°C to +99°C (-40°F to +210°F).
All probes are terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable and are interchangeable whilst still maintaining published accuracy.
ST100S – 30mm tip length, ⌀5mm
-40°C to +99°C (-40°F to +210°F)
- This short tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST100S-15) with 1.5m (4’11”) or extended (part#ST100S-30) with 3m (9’10″).
ST100K – 65mm tip length, ⌀3.2mm
-40°C to +99°C (-40°F to +210°F)
- This medium tipped probe incorporates ~65mm of exposed length of 3.2mm OD 316 stainless probe.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST100K-15) with 1.5m (4’11”) or extended (part#ST100K-30) with 3m (9’10″) cable terminated to MCX plug.
ST100L – 90mm tip length, ⌀3.2mm
-40°C to +99°C (-40°F to +210°F)
- This long tipped probe incorporates ~90mm of exposed length of 3.2mm OD 316 stainless probe.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST100L-15) with 1.5m (4’11”) or extended (part#ST100L-30) with 3m (9’10″) cable terminated to MCX plug.
ST100J – 50mm tip length, ⌀3.2mm
-40°C to +99°C (-40°F to +210°F)
- This short round tipped probe incorporates a 40mm exposed length of 3.2mm OD 316 stainless probe.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST100J-15) with 1.5m (4’11”) or extended (part#ST100J-30) with 3m (9’10″).
ST100T – 140mm tip length, ⌀5mm
-40°C to +99°C (-40°F to +210°F)
This long tipped probe incorporates a 140mm exposed length of 5mm diameter 316 stainless probe.
All materials at probe end of cable are FDA food rated including the cable.
Supplied standard (part# ST100T-15) with 1.5m (4’11”) or extended (part#ST100T-30) with 3m (9’10″).
ST100H – Handled with 105mm tip length, ⌀5mm
-40°C to +99°C (-40°F to +210°F)
- The handled probe incorporates a 70mm long shaped overmolded handle with a 105mm length 5mm diameter (slightly greater than 3/16”) 316 stainless probe.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST100H-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug.
ST100B – Untipped (bare sensor)
-40°C to +99°C (-40°F to +210°F)
- Bare sensor without stainless sheath ready for fitting to custom probe assembly.
- Not rated for food contact or environmentally rated.
- Supplied standard (part# ST100B-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug.
ST10 External Probe
The ST10 probe is suitable only for the LogTag® TREL-8, TREL30-16, UTREL-16F, UTREL30-16 & UTREL30-WiFi models and covers a temperature range of -90°C to +40°C (-130°F to +104°F).
The probe is terminated with a high quality gold plated MCX connector & industrial strength PTFE coaxial cable.
ST10S – 22mm tip length, ⌀5mm
-90°C to +40°C (-130°F to +104°F)
- The tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST10S-05) with 0.5m (1’6”), (part# ST10S-15) with 1.5m (4’11”) or extended (part#ST10S-30) with 3m (9’10″) cable terminated to MCX plug for plugging into LogTag TREL/UTREL.
ST10M – 65mm tip length, ⌀5mm
-90°C to +40°C (-130°F to +104°F)
- The medium tipped probe incorporates a 65mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
- All materials at probe end of cable are FDA food rated including the cable.
- Supplied standard (part# ST10M-15) with 1.5m (4’11”) cable terminated to MCX plug for plugging into LogTag TREL/UTREL.
STX-50 External Sensor Cable
The STX-50 external sensor extension cable is suitable for light industry applications. Cable Terminated to MCX Plug and probe tip can be fully immersed to end of stainless section. Extension to probe connection rating: IP61, -46°C to +74°C (-50.8°F to 165.2°F). For more information, please refer to the product brochure.
STX-50 – For ST10/ST100 sensors
5 meter (~16’ 5”) extension cable for extending ST10 or ST100 external temperature sensors.
- The socket end of the cable (which accepts the ST100 or ST10 sensor plug) is fitted with a flexible sleeve that when the ST sensor’s plug is in place will protect the mated connection to IP61. The STX-50 extension is designed as a permanent connection and not for frequent connections.
- Materials at external sensor end of cable is FDA Food Rated and 316 Stainless Steel.
Wall Mount Bracket
The LogTag® Wall Mount Bracket provides an easy and tidy solution to mounting a LogTag® on a wall, door or vertical surface while still allowing easy removal of the LogTag® for download etc.
Molded in polycarbonate plastic to allow use in a large range of environments.
The Wall Mount Bracket can be used inside coolstores, refrigerators, freezers, shipping containers and many other applications.
- Attach to a vertical surface with supplied tape or optional screw holes
- Accepts all LogTag products excluding TIC20/TICT/iS0°Tag and UTRED30 Loggers
- Robust & durable polycarbonate plastic for wide usage range
UTRED30/UTREL30 Wall Mount Bracket
The UTRED30/UTREL30 Wall Mount Bracket provides an easy and tidy solution to mounting your UTRED30 or UTREL30 Logger on a wall, door or vertical surface while still allowing easy removal of the Logger for download etc.
Molded in polycarbonate plastic to allow use in a large range of environments.
The UTRED30/UTREL30 Wall Mount Bracket can be used inside coolstores, refrigerators, freezers, shipping containers and many other applications.
- Attach to a vertical surface with supplied tape or optional screw holes
- Suitable for the UTRED30-16, UTRED30-WiFi, UTREL30-16 and UTREL30-WiFi Loggers
- Robust & durable polycarbonate plastic for wide usage range
Protective Enclosure
The LogTag® Protective Enclosure is specifically designed for use with LogTag® Logger products and allows LogTags® to be used in harsh environments.
The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change in the same environment.
The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed logger’s LCD or indicators.
Conservatively rated at IP67 (equivalent to NEMA6).
- IP67 – Dust & Waterproof resistant
- Clear, high impact polycarbonate plastic case material
- Supports all non-External Probe products.
LTI-HID
Desktop USB Interface Cradle
The new LTI-HID desktop USB interface cradle replaces the current LTI-USB interface.
The LTI-HID uses interface drivers that are built into all currently supported Windows OS versions, so there is no longer any need to install proprietary drivers.
The LTI-HID is compatible with all standard LogTag recording products having 3 silver contact pins in the lower rear case.
The LTI-HID uses the proven and reliable spring contact arrangement taken from the LTI/USB. The LTI-HID incorporates a micro USB socket for connection to a computer.
Two indicators at the top (red & green), identify what actions the interface is currently performing.
- New and improved design to replace the current LTI-USB Interface Cradle.
- Uses drivers from Windows OS so no need to install proprietary drivers.
- Compatible with all standard LogTag products.
- LED Indicators to identify what action the Interface is performing.
LTI-WM-WIFI
Interface Cradle
The new LogTag Wall Mounted Wireless Interface Cradle is a high-speed interface device that connects TREX/TREL/TRED data loggers to your WiFi network for real-time data download to a cloud platform.
Uploaded data is immediately available to authorized stakeholders and the robust and reliable contacts are good for thousands of insertions.
Inbuilt indicators show data download and network access status.
- Use LTI-WM-WiFi to upload data in real time without access to a computer and installed software.
- Downloaded data is fully encrypted and automatically uploaded to a secure server.
- Easily set up to work with your WiFi network.
- Accepts any TREX/TREL/TRED data loggers.
