Fiocchetti Refrigerator and Freezer models
A range of double temperature equipment featuring two independent compartments (each one monitored by its own controller), cooling units and available in a wide range of capacities, varying from 280 to 700 litres (refrigerator and freezer compartment have the same capacity). All models are available either with ECT-F thermostat or with ECT-TOUCH controller.
ECT-F TOUCH
The ECT-F TOUCH range refrigerators and freezers include as standard the recording of temperatures and alarms for the last 10 years, downloadable via the supplied SD card and software, or directly with an USB pen from the front of the equipment.
The 7’’ user friendly Touch screen offers at a glance any control and command function while allowing a quick access to any recorded data including:
- Instant real temperature with 0.1° precision, and a pre-set set point that can be modified directly from the screen.
- Real time graph of the equipment temperature, customizable, showing up to 3 probe traces (ECT-F controller, evaporator, condenser and, if available: humidity probe, DMLP TOUCH - with additional sensor, temperature product simulation or second chamber probe-).
- This multi-trace graph shows the temperature of the refrigerator for the last 6 hours, and shows other information with specific graphs.
- Power consumption value (power consumption in 24hours, instant consumption etc.).
- Working status of the equipment.
- Mains tension; status and tension of the batteries (if present)
- Icons for accessing: settings and user panel - light - electric digital key lock (optional) - graph details.
ECT-F
Electronic controller, with 0,1 °C resolution, fitted with backlit alphanumeric display with a 5 languages menu. Clear and precise information concerning the working status of the unit is displayed, and so are all the detected critical temperatures.
A password, when activated, identifies two separate access level to the controller (end user and Service), thus protecting the working parameters, the On/Off main switch (on request) and the operating set-point of the unit. The interactive display may be customized and enables an immediate check of all main settings for a fast trouble shooting of eventual problems (Doctor View).
Special functions such as Stop-on-door and Advanced defrosting functions allow an efficient managing of the defrost cycles, reducing thermal variations and consumption.
A list of the last 16 alarms is available from the screen, with signals for:
- Open door
- High temperature
- Low temperature
- Power failure (signaled only when power is restored and if temperature has exceeded the pre-set limits)
- Clogged condenser
Solid Doors
LABOR 2T 280
Temp. Range:
+2 / +15°C | -10 / -20°C
Capacity: 128 + 128 L
W x D x H: 520 x 665 x1770mm
(1665mm ECT-F)
LABOR 2T 400
Temp. Range:
+2 / +15°C | -10 / -25°C
Capacity: 170 + 160 L
W x D x H: 600 x 630 x 2015mm
LABOR 2T 500
Temp. Range:
+2 / +15°C | -10 / -25°C
Capacity: 249 + 230 L
W x D x H: 720 x 740 x 2080mm
LABOR 2T 700
Temp. Range:
+2 / +15 | -10 / -30°C
Capacity: 260 + 265 L
W x D x H: 720 x 860 x 2050mm
SUPERARCTIC 2T 700
Temp. Range:
+2 / +10°C | -20 / -35°C
Capacity: 260 + 230 L
W x D x H: 720 x 860 x 2050mm
Glass Doors
VISION 2T 400
Temp. Range:
+2 / +15°C | -15 / -20°C
Capacity: 170 + 160 L
W x D x H: 600 x 655 x 2015mm
VISION 2T 500
Temp. Range:
+2 / +15°C | -15 / -20°C
Capacity: 249 + 230 L
W x D x H: 720 x 765 x 2080mm
VISION 2T 700
Temp. Range:
+2 / +15°C | -15 / -20°C
Capacity: 260 + 265 L
W x D x H: 720 x 885 x 2050mm